![](/images/new-backgrounds/1331665/33166589x1.webp)
ACCESSORIES | ||
|
|
|
FIELD INSTALLED
OPTIONS/ACCESSORIES
•OPTIONAL CONTROL PANEL KITS
•Arclink Cables
-Without Weld Cable
Cable Lengths: 8 ft | |
16 ft | |
25 ft | |
50 ft | |
100 ft | |
• |
|
Cable Length: 25 ft. (350 amps) | |
50 ft. (350 amps) | |
75 ft. (325 amps) | |
100 ft. (325 amps) |
•Weld Power Cables
-Lug to Lug - 3/0, 600A, 60% Duty Cycle, 10 ft
-Lug to Lug - 3/0, 600A, 60% Duty Cycle, 35 ft
-Lug to Lug - 3/0, 600A, 60% Duty Cycle, 60 ft
-Lug to Lug - 3/0, 600A, 60% Duty Cycle, 110 ft
•Feed Plate Gun Receiver Bushings. For use with:
- Lincoln Gun Connector | ||
- Innershield/SubArc Guns | ||
- Tweco® 4 Gun Connector | ||
- Magnum 200/300/400 Guns | ||
- Tweco® 5 Gun Connector | ||
- Magnum 550 Guns | ||
- Miller® Adapted Gun | ||
- OXO® Gun | ||
- Fast Mate Guns | ||
- Magnum 200/300/400 to | ||
- | ||
• Incoming Bushings |
|
|
- Lincoln | ||
- Lincoln Conduit |
•Wire Straightener
-For
or Separate Mounting |
• |
|
- Adapts |
|
to a 2" Spindle | K363P |
- Adapts |
|
to a 2" Spindle | K438 |
• Coil Adapter |
|
- Adapts |
|
to a 2" Spindle | |
• Plastic Wire Cover for |
|
• Plastic Wire Cover for up |
|
to 60 lb. Wire Packages | |
• Water Connection Kit | |
• Water Connection Adapter | |
• Magnum Flow Sensor | |
• Gas Guard Regulator | |
• Dual Procedure Switch (5 pin) |
|
with Trigger Leads | |
• Large Panel Security Door | |
• Swivel Platform | |
• Light Duty Caster Kit | |
• Insulated Lift Bail |
K162-1 - WIRE SPINDLE ADAPTER
Spindle for boom mounting
mm)I.D. spools with up to 60 lb. (27.2 kg) capacity. User mounted to appropriately prepared boom frame- work. Includes an easily adjustable friction brake for control of overrun (a 2” spindle is standard on Power Feed 10 Dual Bench model).
When a 2” (51 mm) spindle is used with
• Spindle Adapters |
|
- For Mounting |
|
2" I.D. Spools up to 60 lbs. | |
- For Mounting |
|
2" I.D. Spools up to 60 lbs. | |
- For 14 lb. Innershield Coils to be |
|
mounted on 2" O.D. Spools | K435 |
- For 8" O.D. Small spools | |
to be mounted on 2" O.D. spindles | K468 |
K1504-1 - COIL ADAPTER
Permits 50 lb to 60 lb