Safety Precautions, Storing, Stacking | Lincoln Electric SVM148-B

A-3

INSTALLATION

Return to Section TOC

Return to Master TOC

Read this entire installation section before you start installation.

SAFETY PRECAUTIONS

WARNING

Do not attempt to use this equipment until you have thoroughly read the engine manufacturer’s manual supplied with your welder. It includes important safety precautions, detailed engine starting, operating and maintenance instructions, and parts lists.

ELECTRIC SHOCK can kill.

•Do not touch electrically live parts or electrode with skin or wet clothing.

•Insulate yourself from work and ground

•Always wear dry insulating gloves.

ENGINE EXHAUST can kill.

• Use in open, well ventilated areas or vent exhaust outside.

MOVING PARTS can injure.

•Do not operate with doors open or guards off.

•Stop engine before servicing.

• Keep away from moving parts.

See additional warning information at front of this operator’s manual.

Only qualified personnel should install, use, or ser- vice this equipment.

LOCATION AND VENTILATION

Whenever you use the RANGER 300, be sure that clean cooling air can flow through the machine’s diesel engine and the machine case. Avoid dusty, dirty areas. Also, keep the machine away from heat sources. Do not place the engine end of the machine anywhere near hot engine exhaust from another machine or closer than two feet from a wall. And of course, make sure that engine exhaust is ventilated to an open, outside area.

The RANGER 300 may be used outdoors. Do not set the machine in puddles or otherwise submerge it in water. Such practices pose safety hazards and cause improper operation and corrosion of parts.

Always operate the RANGER 300 with the case roof on and all machine components completely assembled. This will protect you from the dangers of moving parts, hot metal surfaces, and live electrical devices.

STORING

1.Store the machine in a cool, dry place when it is not in use. Protect it from dust and dirt. Keep it where it can’t be accidentally damaged from construction activities, moving vehicles, and other hazards.

2.Drain the engine oil and refill with fresh 10W30 oil. Run the engine for about five minutes to circulate oil to all the parts. See the Maintenance section of this manual for details on changing oil.

3.If you are storing the machine for more than 30 days, drain the coolant from the radiator. Open the cock at the bottom of the radiator and remove the pressure cap so that the coolant drains completely. Attach a note that says “NO WATER” on the radia- tor.

4.Remove the battery, recharge it, and adjust the electrolyte level. Store the battery in a dry, dark place.

5.If the engine is not used for a long period of time, every two to three months fill the radiator and run the engine for about five minutes to keep it free from rust.

STACKING

RANGER 300 machines CANNOT be stacked.

TILTING

Place the machine on a secure, level surface whenev- er you use it or store it. Any surfaces you place it on other than the ground must be firm, non-skid, and structurally sound.

The diesel engine is designed to run in a level position for best performance. It can operate at an angle, but this should never be more than 20 degrees in any direction. If you do operate it at a slight angle, be sure to check the oil regularly and keep the oil level at the FULL mark as it would be in its normal level condition. Also, fuel capacity will be a little less at an angle.

RANGER 300 D AND 300 DLX

SVM148-B specifications

The Lincoln Electric SVM148-B is a state-of-the-art inverter-based power source designed for both professional welders and hobbyists. As a versatile machine, it excels in a variety of welding applications including MIG, TIG, and stick welding. This machine is particularly notable for its efficiency and portability, making it an ideal choice for on-site projects or workshops where space is limited.

One of the main features of the SVM148-B is its inverter technology. Unlike traditional transformer-based welders, inverter welders are typically lighter and more compact. This means that users can transport the machine more easily without sacrificing power or performance. The SVM148-B is capable of delivering a substantial amperage range, allowing for adjustments that suit various materials and thicknesses, from thin sheet metal to thicker plates.

The machine offers adjustable output levels, providing precise control over the welding process. This level of control is essential for achieving clean, strong welds and is especially useful when working with different materials. The SVM148-B is equipped with digital display features that provide real-time feedback on power settings and welding parameters, allowing welders to make quick adjustments as needed.

Another significant advantage of the SVM148-B is its duty cycle, which is designed to accommodate extended usage without overheating. A robust duty cycle means that professionals can rely on this machine for prolonged periods, making it a dependable choice for heavy-duty tasks.

The SVM148-B also includes advanced safety features such as overload protection, which ensures that the machine will shut down in the event of excessive current draw. This feature not only protects the equipment but also enhances user safety during operation.

Moreover, the machine is compatible with a wide variety of welding wires and electrodes, adding to its versatility. Whether you're working with stainless steel, aluminum, or mild steel, the SVM148-B can adapt seamlessly.

In conclusion, the Lincoln Electric SVM148-B combines advanced inverter technology with user-friendly features, making it an invaluable addition to any welding setup. Its portability, control options, robust duty cycle, and safety measures set it apart as a reliable and efficient welding solution for professionals and hobbyists alike. Whether for a small workshop or large industrial applications, the SVM148-B meets the demands of modern welding with efficiency and ease.

Lincoln Electric SVM148-B Safety Precautions, Location and Ventilation, Storing, Stacking

Models: SVM148-B