Lincoln Electric SVM154-A Technical Specifications LN-10 Head & Control, General Description

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

A-2				INSTALLATION					A-2
TECHNICAL SPECIFICATIONS – LN-10 Head & Control
			WIRE DRIVE OR WIRE DRIVE SECTION OF FEEDER
SPEC.#		TYPE	LOW SPEED RATIO				HIGH SPEED RATIO
			Speed	Wire Size		Speed		Wire Size
				Solid	Cored			Solid	Cored
K1563-1		10 Series	35-500 IPM	.025 - 3/32 in.	.035 - .120 in	.50 -	750 IPM	.025 - 1/16 in.	.035 - 5/64 in.
Std Drive		Boom Mount	(0.89-12.7 M/M)	(0.6 - 2.4 mm)	(0.9 - 3.0 mm)	(1.25	- 19.0 M/M)	(0.6 - 1.6 mm)	(0.9 - 2.0 mm)
K1563-2		10 Series	55 - 825 IPM	.025 - 1/16 in.	.035 - 5/64 in.	80 - 1250 IPM		.025 - .045 in.	.035 - .045 in.
Hi-Speed		Boom Mount	(1.40 - 21.0 M/M)	(0.6 - 1.6 mm)	(0.9 - 2.0 mm)	(2.00	- 31.8 M/M)	(0.6 - 1.2 mm)	(0.9 - 1.2 mm)
K679-1		Synergic 7F*	50 - 770 IPM	.025 - 1/16 in.	.035 - 5/64 in.		---	---	---
Std Drive		Boom Mount	(1.27 - 19.5 M/M)	(0.6 - 1.6 mm)	(0.9 - 2.0 mm)
K679-2		Synergic 7F*	---	---	---	80 - 1200 IPM		.025 - .045 in.	.035 - .045 in.
Hi-Speed		Boom Mount				(2.00	- 30.5 M/M)	(0.6 - 1.2 mm)	(0.9 - 1.2 mm)
K1559-1	LN-10		35-500 IPM	.025 - 3/32 in.	.035 - .120 in.	50 -	750 IPM	.025 - 1/16 in.	.035 - 5/64 in.
Std Drive		Bench Model	(0.89-12.7 M/M)	(0.6 - 2.4 mm)	(0.9 - 3.0 mm)	(1.25	- 19.0 M/M)	(0.6 - 1.6 mm)	(0.9 - 2.0 mm)
K1559-2	LN-10		55 - 825 IPM	.025 - 1/16 in.	.035 - 5/64 in.	80 - 1250 IPM		.025 - .045 in.	.035 - .045 in.
Hi-Speed		Bench Model	(1.40 - 21.0 M/M)	(0.6 - 1.6 mm)	(0.9 - 2.0 mm)	(2.00	- 31.8 M/M)	(0.6 - 1.2 mm)	(0.9 - 1.2 mm)
			CONTROLS, HEADS AND COMPLETE UNITS
SPEC.#		TYPE	INPUT POWER		PHYSICAL SIZE•			TEMPERATURE RATING

				Dimensions
K1562-1∆			Height	Width	Depth	Weight		Operating	Storage
	LN-10	40-42 Vac + 10%	14.80 “	14.20 “	4.20 “	18.0	Lbs
Control	Controls	4.0 Amps 50/60 Hz	(375.9 mm)	( 360.7mm)	(106.7 mm)	(8.2 Kg)
K1563-1∆	10 Series		7.81 “	14.71 “	11.00“	25.0 Lbs
Std Drive	Boom Mount		(198.4 mm)	(373.6 mm)	(27.94 mm)	(11.3 Kg)
K1563-2	10 Series
Hi-Speed	Boom Mount							+40°C	+40°C
								to	to
K679-1	Synergic 7F*		11.5“	7.16“	8.06“	16.5 Lbs		-20°C	-40°C
Std Drive	Boom Mount		( 285.8mm)	(181.9 mm)	(204.7mm)	(7.5 Kg.)
K679-2	Synergic 7F*
Hi-Speed	Boom Mount
K1559-1	LN-10	40-42 Vac + 10%	20.46 “	14.73 “	30.35 “	65.0 Lbs
Std Drive	Bench Model	4.0 Amps 50/60 Hz	(519.7 mm)	(366.5 mm)	(770.9 mm)	(29.5 Kg)
K1559-2	LN-10
Hi-Speed	Bench Model

• Excluding Wire Reel

∆Included with K1561-Series, LN-10 Boom Packages

*Synergic 7F wire drives use 4-roll drives with 2 driven rolls(Drive roll kits not common with 10 Series heads)

Return to Section TOC

Return to Master TOC

GENERAL DESCRIPTION

The LN-10 is a modular line of 42VAC input 4-roll wire feed- ers. A single control with dual procedure presettability of wire feed speed (in IPM or M/min) and arc voltage is used with a single DC welding power source.

The LN-10 models have controls providing keypad or remote selectability of either of two procedures.

The units offer 4 independently selectable gun trigger modes for each procedure; cold feed, 2 step and 4-step trig- ger and spot weld mode.

Also, 4 selectable, presettable timers for each procedure; preflow, postflow, burnback and spot weld time.

Arc starting can be optimized for each procedure with 5 selectable wire feed acceleration rates, and independent control of slower run-in procedure.

A gas purge key is provided, as well as cold feed forward and reverse keys with independently adjustable forward feed speed setting.

LN-10