‘HOTKEYs’ and ‘1’ - selects channel 1 |
|
‘HOTKEYs’ and ‘2’ - selects channel 2 |
|
‘HOTKEYs’ and ‘3’ - selects channel 3 |
|
‘HOTKEYs’ and ‘4’ - selects channel 4 |
|
‘HOTKEYs’ and ‘5’ - selects channel 5 |
|
‘HOTKEYs’ and ‘6’ - selects channel 6 |
|
‘HOTKEYs’ and ‘7’ - selects channel 7 |
|
‘HOTKEYs’ and ‘8’ - selects channel 8 |
|
‘HOTKEYs’ and ‘9’ - selects channel 9 | (16 port models only) |
‘HOTKEYs’ and ‘1 then 0’ - selects channel 10 | (16 port models only) |
‘HOTKEYs’ and ‘1 then 1’ - selects channel 11 | (16 port models only) |
‘HOTKEYs’ and ‘1 then 2’ - selects channel 12 | (16 port models only) |
‘HOTKEYs’ and ‘1 then 3’ - selects channel 13 | (16 port models only) |
‘HOTKEYs’ and ‘1 then 4’ - selects channel 14 | (16 port models only) |
‘HOTKEYs’ and ‘1 then 5’ - selects channel 15 | (16 port models only) |
‘HOTKEYs’ and ‘1 then 6’ - selects channel 16 | (16 port models only) |
‘HOTKEYs’ and ‘TAB’ - selects the next available channel
‘HOTKEYs’ and ‘M’ - displays the
‘HOTKEYs’ and ‘A’ - selects autoscan mode where each channel is displayed for the selected time (see section 3.6.10). To cancel autoscan mode simply select any fixed channel either by hotkey or by using the
‘HOTKEYs’ and ‘0’ – switches off the video signal. This will cause some monitors to go into standby mode or switch off. The video signal can be
‘HOTKEYs’ and ‘L’ - Logs out the user if password security has been enabled or disables the video and selects the
‘HOTKEYs’ and 'the cursor keys' - Moves the currently displayed
‘HOTKEYs’ and ‘0 then {number}’ – (where {number} is 0,1,2,3,4,5,6,7,8 or 9). Selects the channel specified by {number}. This allows ports on cascaded units to
LINDY CPU Switch Dual Junior Installation and Use | Page 43 |
