EN 5
Device Mapping enables virtualization of all USB Devices connected to the USB 2.0 DEVICE SERVER
unit in your LAN on your local PC.
Click on the Green Arrow Button in the Admin utility to start the device mapping, which will
automatically start the ‘Found New Hardware’ wizard to install the Virtual USB driver.
Continue the Add New Hardware wizard to install the Virtual USB driver for the USB 2.0 DEVICE
SERVER Admin utility.
Select “Search for a suitable driver for my device (recommended)” and click on ‘Next’, the Operating
System automatically will search for the driver until the Virtual USB over IP driver is installed.
Please Click on “Continue anyway” if a Windows dialog pops up about the Digital Signature as shown
below.
Power on the USB 2.0 DEVICE SERVER board and connect an Ethernet cable from the USB 2.0 Device
Server Ethernet port to your Local Area Network.
The USBIP Admin utility is capable enough to identify the USB 2.0 DEVICE SERVER USB servers by
it’s IP address on the network. As soon as the USB 2.0 DEVICE SERVER box is detected with a specific
IP address the Windows automatically invokes a Found New Hardware Wizard to install the drivers for
the USB server box.
NOTE: For proper enumeration of device remove the Firewall from the Windows Machine.