Linear DUAL-824, DVS-2400 manual 4.10COMMUNICATOR MAIN, Purpose, User Response, Communicator Main

4.10COMMUNICATOR MAIN

PURPOSE:

For confi guring the Console’s communicator format, dialing method, remote access password, dialing delay, and auto answer options.

USER RESPONSE:

COMMUNICATOR MAIN

✦Check the ON box to enable the communicator in the Console.

☞NOTE: You may want to turn the communicator off while testing the system to prevent the Console from trying to dial out when it is not connected to a telephone line.

✦FORMAT: Select either 4 BY 2 or ADEMCO CONTACT ID for the communicator format depending on the Central Station’s requirements.

✦DIAL METHOD: Select either TONE or PULSE dialing for the Console.

✦REMOTE ACCESS PASSWORD: Enter a six-digit password. This is the password required to connect to the Console with the RA-2400 program. The default password is “987654”. DO NOT FORGET THIS PASSWORD, LOCAL OR REMOTE PROGRAMMING ACCESS TO THE DVS-2400 IS IMPOSSIBLE WITHOUT IT.

✦30 SECOND DIALING DELAY: Check this box to cause a 30 second delay before the communicator starts to dial after an alarm. This gives the subscriber time to cancel a Central Station report before the unit dials out.

✦SWINGER ELIMINATOR: Check this box to limit the maximum number of Central Station burglary reports to fi ve per arming period. This will not effect the 24-hour zones (fi re, panic, and emergency).

✦REMOTE LOCKOUT: Check this box to disable the Console’s telephone ring detection feature. This keeps the Console from automatically answering the phone. Even if this box is checked, the Console can still be programmed by placing the Console into Test Mode and forcing the Console to answer by pressing the EMERGENCY button while the phone is ringing.

26