Linear DVS-2408, DVS-2400, RA-2400 5.4SENDING DATA, Special Notes, Purpose, User Response, Sending

5.4SENDING DATA

SEND BUTTON

PURPOSE:

For transferring data from an Account Profi le to a DVS-2400 Console.

☞CAUTION: Receiving the data from the Console will overwrite the data in the Account Profile. If you have made changes to the Account Profile, save the profile, then send the profile to the Console before receiving the data into the profile. This leaves previously learned sensor information unchanged. If this is a new Account Profile, its OK to receive the Console data into the new profile.

USER RESPONSE:

SENDING

✦Click the SEND DATA TO CONSOLE button. The Communications Status area will indicate the progress and show if the data was sent to the Console successfully.

SPECIAL NOTES:

You can make changes to the Account Profi le while the Console is connected. Be sure to send any changes to the Console before disconnecting. Minimize the Send/Receive window or slide it out of the way before editing the Account Profi le. There is a time limit to the connection. The Console will automatically disconnect after three minutes of inactivity.

42