Quick Start Guide: Intercom
Double Digit Operation In Double Digit Operation,
all Stations have an I.D. from:
Press two digits for the Station to talk to. RED Status LED blinks at all Stations to indicate the VMC1 system is active.
NOTE: Only one conversation can be active at a time.
11 to 17
21 to 27
or 31 to 37
7.Release the button and wait for a response. Response from the Paged Station is
8.To answer back from the Paged Station, press 2nd digit again.
9.To terminate the conversation, press CLEAR.
10.System times out after 20 seconds after last button press. RED Status LED turns off.
Whole House Calling
1.To initial a whole house Page to all Stations, press HOUSE and speak into the microphone.
2.All responses are hands free.
3.To continue the conversation press HOUSE and speak.
4.To end the conversation, press CLEAR.
5.System times out after 20 seconds after pressing the last button press. RED Status LED turns OFF.
Other Intercom Functions
Listen to Music or access Audio/Monitor Input:
1.Press MUS button at Master or Room Station to enable that station speaker. RED Status LED lights up to show it is active. Any audio input, other Intercom conversations, are heard thru speaker. Received Intercom Page overrides any audio for the duration of the conversation.
2.Press MUS again to turn off
Monitor a Room Station
1.Press MON button at the Master or any Room Station to enable that station’s speaker microphone. GREEN Status LED lights up to indicate the room is being monitored. All Stations where MUS is active
(RED STATUS LED lights up) can hear audio from the monitored location(s). Multiple Stations can be monitored simultaneously.
2.Press MON again to turn off.
3
