Quick Start Guide: Clock Radio
2.Use the DOWN and UP buttons to adjust the desired minutes for the alarm operation
3.Press the ALARM button again to switch to hours. The Hours will begin to blink
4.Use the DOWN and UP buttons to adjust the desired hour for the alarm to activate
5.Press the ALARM button again. The clock display will indicate the alarm status; ON or OFF
6.Press DOWN or UP to toggle between ON and OFF
7.Press ALARM to exit programming
8.If the Tuner is not selected, AUX followed by INPUT
9.Activate MUS at all Stations where the Radio Alarm to be heard When the Alarm is on, the clock will display a large “O” on the far right of the display.
At the designated time the Master will turn on the tuner at the designated alarm time. Only those rooms where MUS is active will the music be heard.
If the Radio is on and the selected Alarm time is reached, the Radio will turn off.
Radio Filter
To reduce background noise or radio interference on the radio, the Master Station is equipped with a frequency noise filter to adjust or reduce treble.
Press AUX button followed by number 4 button at Master to activate the filter. The Radio Filter Led will illuminate when the filter is turned on. To disable the filter, Press AUX followed by the 4 button again.
NOTE: Filter only affects audio from the AM/FM radio.
Enable Aux Music
To enable the Aux music there is a 3.5mm input jack on the Master Station as the audio source:
1.Press and release AUX
2.Press and release INPUT
Green AUX INPUT LED lights up and then Green TUNER LED will turn off. This overrides the Radio as the source to all Stations with MUS activated. To revert to Radio input, simply repeat steps 1 and 2 .
6
