Linksys E2500 manual Wireless Security

Linksys E-Series

WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise

These option is used in coordination with a RADIUS server. (These should only be used when a RADIUS server is connected to the router.)

NOTES

If you select WPA2/WPA Enterprise Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA Enterprise and the same shared key.

If you select WPA2 Enterprise as your Security Mode, each device in your wireless network MUST use WPA2 Enterprise and the same shared key.

If you select WPA Enterprise as your Security Mode, each device in your wireless network MUST use WPA Enterprise and the same shared key.

RADIUS Server  Enter the IP address of the RADIUS server.

RADIUS Port  Enter the port number of the RADIUS server. The default is 1812. Shared Key  Enter the key shared between the router and the server.

Wireless Security

WEP

WEP is a basic encryption method, which is not as secure as WPA.

NOTE:

If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and shared key.

Encryption  Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits).

Passphrase  Enter a passphrase to automatically generate WEP keys. Then click Generate.

Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually. TX Key  Select a default TX (Transmit) Key to use. The default is 1.

9