Linksys
Your Internet cable is not plugged in
message
If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps.
To fix the problem:
1.Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN.
Back view of router
Troubleshooting
Back view of cable modem
Back view of DSL modem
2.Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or l position.
3.If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP.
Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port.
4.If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.
5.Return to the Linksys Connect window and click Next to try again. If the window has already been closed, run the Setup program again on the router’s CD.
13
