Linksys E-Series
Product overview
E900/E1200/E1500/E2500/E3200
Back view
| | Power port |
USB port (E2500V3 and | Internet port | Power indicator |
E3200 only) | | |
Ethernet ports | Wi-Fi Protected Setup button |
Your router’s appearance may vary
•• USB port (E2500V3 and E3200 only)—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port.
•• Ethernet ports—Connect Ethernet cables (also called network cables) to these Fast Ethernet (10/100, for E900, E1200, E1500 and E2500) or Gigabit (10/100/1000, for E3200) ports, color coded blue, and to other wired Ethernet network devices on your network.
•• Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem.
Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. For more information, see “Wireless Security” on page 8.
Product overview
•• Power indicator—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Flashes slowly during bootup, during firmware upgrades, and during a Wi‑Fi Protected Setup connection. Flashes quickly when there is a Wi‑Fi Protected Setup error.
•• Power—Connect the included AC power adapter to this port.
CAUTION
Use only the adapter that came with your router.
•• Power button—Press (on) to turn on the router.
Bottom view
Your router’s appearance may vary
•• Reset button—Press and hold this button for 5-10 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility.
