Linksys
How to install your router
To install your router:
1.Power on your new router. If replacing an existing router, disconnect it.
2.Connect the Internet cable from your modem to the yellow Internet port on your router. Wait until the power light on the front of the router is solid.
3.Connect to the secure wireless name shown in the Quick Start Guide that came with your router. (You can change the network name and password later during router setup.) If you need help connecting to the network, refer to your device documentation. Note: You will not have Internet access until router setup is complete.
4.Open a web browser and follow the instructions to complete your router’s setup. If instructions do not appear in the web browser, enter linksyssmartwifi.com in the browser’s address bar.
5.At the end of setup, follow the
••Change your router’s name and password
••Set up guest access
••Configure parental controls
••Connect devices to your network
••Test your Internet connection speed
NOTE:
As part of the router setup process, you will be sent a verification
If you cannot click the link while behind your new Linksys router, log into Linksys Smart
Setting Up: Basics
TIP:
Print this page, then record your router and account settings in the table below as a reference. Store your notes in a safe place. Setup also saves your setup information as a file to your computer desktop.
Network Name (SSID)
Network Password
Router Password
Guest Network Name
Guest Network
Password
Linksys Smart
Username
Linksys Smart
Password
6
