2. The Network window will appear (below).
Click on the Configuration tab. A window
similar to the one below will appear. There
may be other components listed in addition
to the ones shown below (for example, Dial-
up Adapter), which is normal. If any of the
components shown below are missing, how-
ever, you’ll need to manually install them. If
that’s the case, refer to the Manually
Installing the Network Components section.
• Client for Microsoft
Networks
• Linksys EG1032/EG1064
Instant Gigabit Network
Adapter
• IPX/SPX-compatible
Protocol
• NetBEUI
• TCP/IP
3. Click on the
Configuration tab, fol-
lowed by the File and
Print Sharing button.
The File and Print
Sharing window will
appear.
4. If you would like others
to be able to access the
files on your PC's hard
drive, select I want to be
able to give others
access to my files.
5. If you would like to share your printer with other users on the network,
select I want to be able to allow others to print to my printer.
6. Click the OK button. File and Printer Sharing for Microsoft Networks
should now appear in the list of installed components.
NNoottee:: If you need to
install the TCP/IP
Protocol, refer to the
section on IInnssttaalllliinngg
TTCCPP//IIPPof this manual.
NNoottee:: If you do not enable File and Print
Sharing, your PC will be invisible on the
network and inaccessible to other users.
Configuring The Instant GigabitNetwork Adapter1. Once you are back at the Windows desktop, click on your taskbar's Start
button, then Settings, then Control Panel, and then double-click the
Networkicon.
Configuring the Adapter for Windows 95, 98, and Millennium
Instant Gigabit Series EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit
4443