Instant Gigabit Series

Tips on Switching Your Network

Here are some of the ways your new EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch can help you optimize your network speed.

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Installing the Drivers for Windows 95

• Speed up Nodes From Your 10BaseT Network

In a 10BaseT network, connect your hubs, file servers, and key users, such as network administrators, directly to your Switch to channel dedicated band- width in full-duplex mode (if operating in full-duplex) to each station. The Switch will have dedicated communication with all its connections simultane- ously, whereas a hub will only communicate in half-duplex transfer mode and broadcasts information to all ports.

• Conserving Bandwidth with 10Mbps & 100Mbps Segments

10BaseT and 100BaseTX hardware are not readily compatible, but your 10/100 Switch can designate network segments of different speeds. This allows you to run one 10Mbps segment to serve users without a need for con- siderable speed, and a faster 100Mbps segment devoted to users who depend heavily on graphics, multimedia, database, or other speed-intensive applica- tions. With switched segmentation, your 100Mbps users will not be slowed

Overview

After installing the Instant Gigabit Network Adapter in your computer, follow these instructions for installing the network driv- er. The installation procedure for the net- work driver will vary slightly depending on the version of Windows 95 you are using and your current system configuration. For troubleshooting tips during setup, refer to the Troubleshooting section.

There are different versions of Windows 95:

Version A

Version B (also known as OSR2)

Note: During the installa- tion, Windows 95 may ask you for a computer or work- group name. If so, turn to step eight in Network Component Configuration. Once you have established your computer and work- group names, go back to where you left off and con- tinue with the installation.

down by the users on the 10Mbps segment.

• Run 10Mbps Peripherals in Your Fast Ethernet Network

Most of the network peripherals in place today run at 10Mbps, since 10BaseT has been the standard network speed to date. These peripherals, designed to operate at 10Mbps, cannot readily communicate with 100BaseTX equipment. A 10Mbps interface is also required for cable and DSL connections, which are quickly becoming very popular ways to access the Internet. Your 10/100 Switch provides your 10BaseT equipment and cable and DSL lines with a 10Mbps interface while still running your Fast Ethernet devices at 100Mbps.

• Strengthen Data Transfers Through Signal Regeneration

Your Switch functions as a repeater, which regenerates data signals as they pass through it. This feature acts as a safeguard to deter data loss and ensure that transmissions arrive at their destination intact. Switches positioned between hubs can preserve your data’s integrity and eliminate your need to buy and use repeaters in your Fast Ethernet network.

The installation procedure for the network driver will vary slightly depending on which version of Windows 95 you are using. To begin the driver installation, and to determine which version of Windows 95 you are using:

1.Start up your PC.

2.Windows 95 will automatically detect the Network Adapter in your com- puter. If the Update Device Driver Wizard window appears (see next page), you are using Windows 95 version B. If a window other than this appears, you are using Windows 95 version A. For Windows 95 version A driver installation, refer to the Appendix.

13

14

Page 10
Image 10
Linksys EG0801SK manual Installing the Drivers for Windows, Tips on Switching Your Network

EG0801SK specifications

The Linksys EG0801SK is an advanced 8-port Ethernet switch designed to provide high-performance networking solutions for small to medium-sized enterprises, home offices, or any environment requiring reliable connectivity. Combining speed, performance, and versatility, this switch is an essential component for users looking to expand their local network efficiently.

The EG0801SK operates on a non-blocking architecture, ensuring that each port can handle consistent data transfer rates without interference. This is crucial for environments where multiple devices are connected simultaneously, as it guarantees minimal latency and efficient bandwidth utilization. With support for 10/100/1000 Mbps speeds, the switch is fully compatible with various devices, including computers, printers, and IP cameras, facilitating smooth communication across the network.

One of the standout features of the Linksys EG0801SK is its switch fabric that offers a high throughput. This means that it can handle burst traffic without any drops, ensuring that data-heavy applications can run uninterrupted. With Auto-MDI/MDIX support, users need not worry about the type of cables used; the switch automatically detects and adjusts, simplifying installation processes and reducing setup time.

In addition to its performance capabilities, the EG0801SK incorporates energy-efficient technologies that help reduce power consumption. The device uses energy-saving features such as "Green Ethernet," which adjusts power usage according to the number of connected devices and their respective activity levels. This makes the EG0801SK an environmentally friendly option, appealing to businesses looking to reduce their carbon footprint.

The sleek design of the Linksys EG0801SK allows it to fit seamlessly into any office environment, whether mounted on a wall, placed on a desk, or incorporated into a server rack. The switch is also equipped with LEDs for port status monitoring, providing users with real-time insights into connectivity and operation status.

In conclusion, the Linksys EG0801SK is a robust, feature-rich Ethernet switch that stands out due to its performance, reliability, and energy efficiency. It is designed to meet the demands of today's networking needs while ensuring ease of use and maintenance, making it an ideal choice for any networking environment.