AMX Anterus ANT-RDR Product Specifications, ANT-RDR Mounting/Installation, ANT-RDR Specifications

Anterus™ RFID Solution

AXLink supports multiple topologies including Star, Daisy-Chain, or a combination of both Star and Daisy-Chain.

ANT-RDR Product Specifications

The following table provides product specifications for the ANT-RDR Reader:

ANT-RDR Specifications

Front Panel Components:	• RF Status LED (red): Indicates reception from RFID tag.
	• AXLINK Status LED (green): Blinks to indicate the device is installed and
	communicating properly.
	Solid ON = Power on, but no master connection.
	Solid OFF = No power
	• RF Stub Antenna (433.92 MHz)
Rear Panel Components:	• AxLink connector - 4-pin 3.5 mm mini-Phoenix (male) connector provides data
	and power to the ANT-RDR.
	• DEVICE ID 8-position DIP Switch - Used to set the unique binary device
	number. The device number is set by the total value of DIP switch positions
	that are ON (down).
RF Specifications:	• Transmission Frequency: 433.92 MHz
	• Transmission Range: Up to 100 feet/30 meters (adjustable)
	Note: Tag and Reader communication distances assume optimal orientation
	between Tag and Reader. Read distances may also vary as a result of the pres-
	ence of metal and environmental conditions.
System Limitations:	• Up to 30 ANT-RDRs per system
	• Up to 250 tags (ANT-TAG or ANT-BDG) per ANT-RDR
Power Requirements:	• 780 mW; ±12 VDC, 90 mA (max.)
	• Power provided by 4-pin AxLink connector.
Environmental:	• Operational temperature: 32º F to 140º F (0º C to 60º C)
	• Storage temperature: -4º F to 158º F (-20º C to 70º C)
	• Humidity: 5% to 90% (non condensing)
Enclosure:	Black Metal Powder coat
Dimensions (HWD):	• .906 x 2.500 x 3.424 (23.01 mm x 63.50 mm x 86.96 mm)
	• Does not include antenna.
Weight:	4 oz. (113.4 grams)
Certification:	The following standards applied in accordance with Article 5 of the directive,
	1999/5/EC:
	• EN 300 220-1 V1.2.1 (1997-11)
	• ETS 300 683 (1997-03)
Other AMX Equipment:	• AC-DIN-EXTR DIN Rail Mounting Bracket (FG532-05)

Anterus products are designed to not interfere with WiFI and Zigbee frequency spectrum used by other AMX products.

ANT-RDR Mounting/Installation

The ANT-RDR can be DIN-Rail mounted using the (optional) AC-DIN-EXTR DIN Rail Mounting Bracket (FG532-05). Refer to the documentation included with the AC-DIN-EXTR DIN for mounting instructions.

Anterus RFID Solution 3