Anterus™ RFID Solution
ANT-BDG | ANT-TAG |
Badge Tag | Device/set Tag |
ANT-RDR
RFID Reader
FIG. 1 Anterus RFID Group
ANT-RDR RFID Reader
The ANT-RDR (FG5172) connects to the NetLinx controller to initiate system events whenever an ANT- TAG Device/Asset tag, or ANT-BDG ID badge passes into its zone (FIG. 2).
RF Stub Antenna (433 MHz)
8-position
DEVICE
DIP Switch4-pin AxLink Connector
AxLink/RF 
Status LEDs
FIG. 2 ANT-RDR RFID Reader
The ANT-RDR communicates with the NetLinx Master via AXLink, which supports up to 255 devices on a single AXLink bus spanning for a total distance of 3000 feet (915 m).
The ANT-RDR uses a 4-pin 3.5 mm mini-Phoenix (male) connector to provide data and power to the ANT-RDR via the AXLink bus.
