Instant Gigabit Series

Getting to Know the EtherFast® 10/100/1000 Workgroup GigaSwitch

The 10/100/1000 Workgroup GigaSwitch’s Rear Panel

The Workgroup GigaSwitch’s Ports

GigaSwitch

The GigaSwitch port is used to connect to the PC

 

into which you have installed your Instant Gigabit

 

Network Adapter. Or, it can be used to expand your

 

network by connecting to a 1000Mbps hub or

 

switch, which is done by simply running the includ-

 

ed Category 5e cable from the GigaSwitch port to

 

the uplink port on the 1000Mbps hub or switch.

 

When connecting to your Instant Gigabit Network

 

Adapter, just plug one end of the included Category

 

5e cable into the RJ-45 port on the Adapter and the

 

other end into the GigaSwitch port on the

 

GigaSwitch.

Ports 1-8

These eight LAN (Local Area Network) ports con-

 

nect to network devices, such as PCs, print servers,

 

network attached storage, and remote hard drives at

 

10/100Mbps.

Power

The Power port is where you will connect the

 

power adapter.

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

The 10/100/1000 Workgroup GigaSwitch’s Front Panel

The LED Indicators

Power

Amber. The Power LED lights up when the Switch is pow-

 

ered on.

Link/Act

Green. The Link/Act LED serves two purposes. If the LED

 

is continuously lit up, the Switch is successfully connected to

 

a device through the corresponding port (1 through 8). If the

 

LED is flickering, the GigaSwitch is actively sending or

 

receiving data over that port.

FD/Col

Green. The FD/Col LED also serves two purposes. If this

 

LED is lit up continuously, the connection made through the

 

corresponding port is running in Full Duplex mode. If the

 

LED flickers, the connection is experiencing collisions.

 

Infrequent collisions are normal.

 

If this LED flickers too often, there may be a problem with

 

your network.

10/100

Amber. The 10/100 LED lights up for any port when that port

 

is operating at 100Mbps. If the LED is off while the network

 

is operating, the port is operating at 10Mbps.

1000

Amber. The 1000 LED lights up when the Gigaswitch port is

 

operating at 1000Mbps. If the LED is flickering, data is

 

being transmitted through the port.

1000 Link/Act

Green. The 1000 Link/Act LED lights up when the Gigabit

 

port is operating at 1000Mbps.

1000 FD/Col

Green. The 1000 FD/Col LED lights up continuously when

 

the switch is operating at 2000Mbps and flickers when expe-

 

riencing data collisions.

3

4

Page 4 Page 6
Page 5
Image 5
Linksys EG0801SK manual 10/100/1000 Workgroup GigaSwitch’s Rear Panel, Ports, Power
Page 4 Page 6

EG0801SK specifications

The Linksys EG0801SK is an advanced 8-port Ethernet switch designed to provide high-performance networking solutions for small to medium-sized enterprises, home offices, or any environment requiring reliable connectivity. Combining speed, performance, and versatility, this switch is an essential component for users looking to expand their local network efficiently.

The EG0801SK operates on a non-blocking architecture, ensuring that each port can handle consistent data transfer rates without interference. This is crucial for environments where multiple devices are connected simultaneously, as it guarantees minimal latency and efficient bandwidth utilization. With support for 10/100/1000 Mbps speeds, the switch is fully compatible with various devices, including computers, printers, and IP cameras, facilitating smooth communication across the network.

One of the standout features of the Linksys EG0801SK is its switch fabric that offers a high throughput. This means that it can handle burst traffic without any drops, ensuring that data-heavy applications can run uninterrupted. With Auto-MDI/MDIX support, users need not worry about the type of cables used; the switch automatically detects and adjusts, simplifying installation processes and reducing setup time.

In addition to its performance capabilities, the EG0801SK incorporates energy-efficient technologies that help reduce power consumption. The device uses energy-saving features such as "Green Ethernet," which adjusts power usage according to the number of connected devices and their respective activity levels. This makes the EG0801SK an environmentally friendly option, appealing to businesses looking to reduce their carbon footprint.

The sleek design of the Linksys EG0801SK allows it to fit seamlessly into any office environment, whether mounted on a wall, placed on a desk, or incorporated into a server rack. The switch is also equipped with LEDs for port status monitoring, providing users with real-time insights into connectivity and operation status.

In conclusion, the Linksys EG0801SK is a robust, feature-rich Ethernet switch that stands out due to its performance, reliability, and energy efficiency. It is designed to meet the demands of today's networking needs while ensuring ease of use and maintenance, making it an ideal choice for any networking environment.
Top Page Image Contents