Miscellaneous Settings

Setup menu

Screensaver

Use this menu to select the period of inactivity before the

screensaver starts. You can also disable it completly by selecting “Disabled”.

Disabled 60 sec 5 min

30 min

Screen Saver: Entering this option enables you to set the number of minutes that the player will remain idle before the screen saver is activated.

Front Panel Brightness: Enter this option to set the brightness of the light in the front panel display as well as the two front buttons.

Firmware Version: This menu displays the version of the current firmware installed on the player. A Firmware is a software package that contains performance improvements or new features, therefore it is recommended that the player always uses the latest available version.

Firmware Update: If your player has access to the Internet via either a wired or wireless network connection, you will also be able to automatically update your firmware from this menu if a later version exists. Please read the next chapter about how to update your player

Quick Setup: Enter this option to access the Quick Setup that guides you through the same basic and easy setup procedure as when you powered ON the player for the first time.

Reset To Factory Defaults: Resets the player to its default settings. By selecting this item, you will lose all of the settings that you have entered.

12 Updating your Player

Linksys is dedicated to improving its products and to ensuring that you are always able to obtain the latest features and improve- ments via firmware updates. This section explains how to do this.

Obtaining new firmware with the player connected

If your player is connected to the Internet via a network, obtaining and installing a new firmware update has never been easier.

To check for updates, simply enter the setup menu by press- ing SETUP on your remote control, go to the MISCELLANEOUS SETTINGS section, and select FIRMWARE UPDATE. A message will appear telling you whether a Firmware update is available. If new firmware is available, simply follow the steps On-Screen. The Firmware will automatically download and be written to the KiSS 1600. This step takes a few minutes depending on your connec- tion. A REBOOT message will appear when the update has been installed. After you have restarted your player, you will return to the Quick Setup. Complete the easy steps to start using it again.

Whenever updates are available, they are also posted to the Linksys website in the support section, so that even when your player is not connected to the Internet and you have access to our website from elsewhere, you will still be able to obtain the latest updates

EN

21

Page 19
Image 19
Linksys KiSS 1600 manual Updating your Player, Miscellaneous Settings, Obtaining new firmware with the player connected