Linksys NWR04B manual Set Additional, Setting Up the Router with a DSL Connection

Figure 5-10

Network Everywhere® Series

Figure 5-7

Document and save these settings for future reference and click the Next but- ton to continue. If you wish to step back in the setup process, click the Back button.

The following screen will detect your modem’s IP settings and configure the Router with these settings. (The screen shown in Figure 5-8 is what you would see if you see if you had a DHCP server.) Click the Next button to continue. If you wish to step back in the setup process, click the Back button.

Figure 5-8

Wireless Cable/DSL Router

Configuration is complete and the Router is set up when you see the final screen, shown in Figure 5-

9.Click the Finish button to close the Setup Wizard.

To set up any further com- puters to connect to the Router, run the Setup Wizard again and choose

Set	Up	Additional
Computer(s). To fine-tune			Figure 5-9
the	Router’s	performance,

you can continue to Chapter 6: The Router’s Web-based Utility.

Setting Up the Router with a DSL Connection

When you first select DSL as your ISP, you will see a warning screen regard- ing PPPoE (shown

in Figure 5-10). If you have a PPPoE connection, follow these directions. If your connection is not PPPoE, disre- gard these direc- tions.

The next screen, shown in Figure 5-11, will ask you to verify that your modem is connected properly. Verify the connection and click the Next button to con- tinue. If you wish to step back in the setup process, click the Back button. To print this screen, click the Print button.

Figure 5-11

21 22