Satellite Status Page (left). Custom Gauges (right).
This screen will show a graphical view of the satellites that are in view. Each satellite is shown on the circular chart relative to your position. The point in the center of the chart is directly overhead. The small inner ring represents 45° above the horizon and the large ring represents the horizon. North is at the top of the screen. You can use this to see which satellites are obstructed by obstacles in your immediate area if the unit is facing north.
The GPS receiver will track satellites that are in bold type. The re- ceiver hasn't locked onto a satellite if the number is grayed out, there- fore it isn't being used to calculate your position.
Beneath the circular graph will be bar graphs, one for each satellite in view. Since the unit has twelve channels, it can dedicate one channel per visible satellite. The taller the bar on the graph, the better the unit is receiving the signals from the satellite.
You can set up custom digital gauges through the Satellite Status page menu. The Custom Gauges feature allows you to monitor a wide vari- ety of data from one page.
To set up Custom Gauge page:
1.Select the SATELLITE STATUS page from the Pages menu, highlight CUS- TOM GAUGES and press ENT.
2.Press MENU. OVERLAY DATA will highlighted, so press ENT. The Overlay Data shown menu will appear.
3.Highlight (PRESS ENT TO ADD…) and press ENT to open the Data Viewer menu with five expandable data categories: GPS Data, Navigation, Trip Calculator, Time and Sensor Data.
4.Highlight the desired data category and press ENT, which will ex- pand the list, revealing several subcategories with checkboxes next to them.
