3.Press ↓ or ↑ to select a different depth range. A horizontal blue bar highlights the selected range.
4.When the new range is selected, press EXIT to clear the menu. Repeat these steps to turn on Auto Depth Range.
NOTE:
The sonar's depth capability depends on the water, bottom condi- tions, transducer installation and other factors.
Depth Range - Upper and Lower Limits
Virtually any segment of the water column can be displayed by using the upper and lower limit feature. This lets you pick the shallow and deep depth range limits that are shown on the screen, provided there is at least 10 feet between the upper and lower limit you select. For ex- ample, a range from 12 feet to 34 feet could be used.
Changing the upper and lower limits gives you far greater control over the depth range. This feature lets you "zoom in" the display in almost unlimited combinations. Nearly any segment of the water column, from the surface to the bottom can be shown.
Sonar Page Menu with Upper and Lower Limits selected (left). Sonar
Chart Limits menu with Upper Limit selected (right).
To change the upper and lower limits:
1.From the Sonar Page, press MENU↓ to UPPER AND LOWER LIMITSENT. The Sonar Chart Limits menu appears, with Upper Limit selected.
2.To set the upper limit, press ENT. Press ↑ or ↓ to change the first number, then press → to move the cursor to the next number and re- peat until the depth is correct, then press EXIT.
72
