Lowrance electronic LMS-520C, LMS-525C DF

218

vanced Options menu, only the settings for the Port Fuel Flow will be

reset to factory defaults. Other fuel flows on the network will not be

affected.

To restore default settings:

1. Press MENU| MENU, use ↑ ↓ to select NMEA 2000 and press ENT. The

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.

2. Highlight BUS SETUP and press ENT, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.

3. Use ↑ ↓ to select the desired fuel flow and press ENT. The Device

Configuration menu will appear.

4. Highlight ADVANCED OPTIONS and press ENT.

5. Select RESTORE DEFAULTS and press ENT. The following message will

appear: Are you sure you wish to change this device's configuration?

6. Highlight YES and press ENT. Press EXIT repeatedly to get back to the

main display.

EP-15 Fluid Level Configuration

To input Device Name:

1. Press MENU| MENU, use ↑ ↓ to select NMEA 2000 and press ENT. The

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.

2. Highlight BUS SETUP and press ENT, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.

3. Select a fluid level you want to rename and press ENT. The Device

Configuration menu will appear with the Device Name dialog box high-

lighted.

4. Press ENT and use ↑ ↓, ← → to input the desired name for the fluid

level. Press ENTER. Press EXIT repeatedly to get back to the main dis-

play.

To select Tank Instance (Location):

1. Press MENU| MENU, use ↑ ↓ to select NMEA 2000 and press ENT. The

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.

2. Highlight BUS SETUP and press ENT, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.

3. Select the desired fluid level and press ENT. The Device Configura-

tion menu will appear.