To turn on/off Backlight Synchronization:
1.Press MENUMENU, select NMEA 2000 and press ENT.
2.Highlight BACKLIGHT SYNCHRONIZATION and press ENT, which will turn on/off Backlight Synchronization.
3.Press EXIT repeatedly to get back to the main display.
Configuring EP Sensors
All configurable devices are configured through their Device Configura- tion menus, which may be accessed through the network devices list on the Bus Configuration menu.
EP-35 Temperature Configuration
To input Device Name:
1.Press MENUMENU, use ↑ ↓ to select NMEA 2000 and press ENT. The NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man- agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn- chronization.
2.Highlight BUS SETUP and press ENT, which will open the Bus Configu- ration menu. A list of network devices will be at the top of the page.
3.Select the temp sensor you want to rename and press ENT. The De- vice Configuration menu will appear with the Device Name dialog box highlighted.
4.Press ENT and use ↑ ↓, ← → to input the desired name for the temp sensor. Press ENT. Press EXIT repeatedly to get back to the main dis- play.
To select Temp Type:
1.Press MENUMENU, use ↑ ↓ to select NMEA 2000 and press ENT. The NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man- agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn- chronization.
2.Highlight BUS SETUP and press ENT, which will open the Bus Configu- ration menu. A list of network devices will be at the top of the page.
3.Select the desired temp sensor and press ENT. The Device Configura- tion menu will appear.
4.Highlight TEMP TYPE and press ENT. The following list of Temp Types will appear: Water, Outside, Inside, Engine Room, Cabin, Live Well, Bait Well, Refigeration, Heating System and Unknown.
5.Highlight the desired Temp Type and press ENT. The following con- firmation message will appear: Are you sure you wish to change this device's configuration?
6.Highlight YES and press ENT. Press EXIT repeatedly to get back to the main display.
