The cursor can be moved to any location on the screen, letting you pin- point the depth of a target.

1.From the Sonar Page, press MENUto DEPTH CURSORENT.

2.The depth cursor appears. Press to lower the cursor line; press to raise the cursor line.

3.To clear the depth cursor, press EXIT.

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically placed in the lower half of the screen. This is called Auto Ranging and is part of the automatic function. However, depending upon the bottom depth and the current range, you can change the range to a different depth.

Sonar Page menu with Depth Range selected (left). Depth Range Con-

trol Scale (right).

1.From the Sonar Page, press MENUto DEPTH RANGEENT.

2.The Depth Range Control Scale appears. Press or to select a dif- ferent depth range. A blue bar highlights the selected range. The light numbers cannot be selected.

3.When the new range is selected, press EXIT to clear the menu.

Depth Range - Manual

You have complete control over the range when the unit is in the man- ual mode. There are 16 depth ranges, from 5 feet to 4,000 feet.

To switch to Manual Depth Range:

1.First, turn off automatic depth range. From the Sonar Page, press

MENUto AUTO DEPTH RANGEENT.

2.Press to DEPTH RANGEENT and the Depth Range Control Scale ap- pears.

71

www.Busse-Yachtshop.de email: info@busse-yachtshop.de

Page 81
Image 81
Lowrance electronic LMS-525C DF, LMS-520C manual Depth Range Automatic, Depth Range Manual