To set the Year:
1.Make sure your unit has acquired your position, then press MENUMENU, highlight SYSTEM SETUP and ENT.
2.Highlight SET LOCAL TIME and press ENT.
3.Select YEAR and press ENT. Use ↑ ↓ to select the year and press ENT.
To select Time Format:
1.Make sure your unit has acquired your position, then press MENUMENU, highlight SYSTEM SETUP and ENT.
2.Highlight SET LOCAL TIME and press ENT.
3.Select the desired format, 12 Hour or 24 Hour, and press ENT.
To select a Date Format:
1.Make sure your unit has acquired your position, then press MENUMENU, highlight SYSTEM SETUP and ENT.
2.Highlight SET LOCAL TIME and press ENT.
3.Select the desired Date Format, Month/Day/Year, Day/Month/Year or Year/Month/Day and press ENT.
To Configure DST:
Configure DST allows your unit to automatically adjust to Daylight Saving Time. Select the country with DST rules that match your region or simply accept the default.
1.Make sure your unit has acquired your position, then press MENUMENU, highlight SYSTEM SETUP and ENT.
2.Select SET LOCAL TIME and press ENT.
3.Highlight the CONFIGURE DST button and press ENT. From the Country menu, select the country with DST rules that match your region.
4.Press EXIT repeatedly to return to the map display.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to boost the accuracy of the position fix. When the WAAS signal is lost or acquired, an alarm message appears. Since the U.S. government is still developing the WAAS system, its not unusual for a GPS/WAAS re- ceiver to frequently lose and reacquire its lock on a WAAS satellite. That can result in the alarm repeatedly going on and off. You have the option of turning off the WAAS Acquired/Lost alarm without affecting how the unit uses WAAS.
182
