Lowrance electronic LMS-520C, LMS-525C DF

187

You can have trail points placed at any distance between 0.01

mile/nm/km to 9.99 mile/nm/km. The default setting is 0.10 mi.

WARNING:

If you uncheck the Update Trail option, automatic trail

creation and recording will be turned off. You must turn

it back on to record trails. The default setting is on.

To select a Trail Update Option:

1. Press MENU|MENU, select MY TRAILS and press ENT.

2. Highlight the TRAIL OPTIONS button and press ENT. The Trail Options

menu will appear with three update criteria: Auto, Time and Distance.

NOTE:

The Update Active Trail checkbox should be checked (turned on). If

it is unchecked (turned off), your trails will not be updated. To turn

it on, highlight UPDATE ACTIVE TRAIL and press ENT.

3. Highlight the desired method for updating trails and press ENT. If

you choose Time or Distance as your update criteria, you can input the

desired update rate (Time) or desired Update Distance (Distance) in

the dialog box that appears at the bottom of the menu.

4. To input your Update Rate or Update Distance, highlight Update

Rate or Update Distance and press ENT. Use ↑ ↓ , ← → to input the

desired setting and press ENT.

5. Press EXIT repeatedly to return to the map display.

Time set as the update criteria (left). Notice the Update Rate dialog

box at the bottom of the menu. Distance is set as the update criteria

(right). The Update Distance dialog is at the bottom of the menu.