Figure 1.
Figure 3.
Figure 2.
Figure 4.
Navigating along a route: Fig. 1 shows the Navigation Page at the start of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been triggered and the bearing arrow on the compass rose has turned to point toward Wpt 2, off to the east. In Fig. 3 the traveler has turned east on his new course and is heading straight for Wpt 2, which is 2.37 miles away. Fig. 4 shows route navigation on the Map Page. In this figure, the traveler has reached Wpt 2 and is
Trails
Delete a Trail
This is the command used to delete a trail: Press MENUMENU↓ to MY TRAILSENT↓ to trail nameENT→ to DE-
LETE TRAILENT← to YESENT.
Tip:
You can also delete all trails at once:
1.Press MENUMENU↓ to MY TRAILSENT.
2.Press → to DELETE ALLENT← to YESENT.
