HP 5SI manual Simm Validation Error Messages, Hardware Type Hardware Device ZZ Error Number

SIMM Validation Error Messages

Validation error messages appear when a SIMM fails to be initialized when the mopier is turned on. This error is in the format 53.XY.ZZ ERROR. Table 7-1 lists these errors.

Table 7-1	Validation Error Messages
X (Hardware Type)		Y (Hardware Device)	ZZ (Error Number)
0: ROM		0: Internal Memory	0: Unsupported memory
1: RAM		1: SIMM Slot 1	1: Unrecognized memory
		2: SIMM Slot 2	2: Unsupported memory size
		3: SIMM Slot 3	3: Failed RAM test
		4: SIMM Slot 4	4: Exceeded maximum RAM size
			5: Exceeded maximum ROM size
			6: Invalid SIMM speed
			7: SIMM reporting information incorrectly
			8: SIMM RAM parity error
			9: (n/a)
			10: SIMM address conflict
			11: ROM out of bounds
			12: Could not make temporary mapping

Although these errors can be ignored, the SIMM that caused the error will not be configured. You can still print if the SIMM has more than one bank of memory.

7 Maintenance & Troubleshooting

EN

Maintenance and Troubleshooting 7-21