HP 5SI manual Settings and Defaults, Restoring Factory Settings, Setting or Default Explanation

	Settings and Defaults
	The mopier makes most printing decisions based on either temporary
	settings or permanent defaults.
	Settings you send from software applications override equivalent mopier
N o t e
	defaults.
Table 4-3
	Settings and Defaults
Setting or
Default		Explanation
Temporary setting		A value set for the current print job by your software application. For
		example, if your mopier default is portrait, you can request your software
		to print pages with a landscape orientation. This temporary setting
		remains in effect until the current print job is finished.
Control panel		A value set at the control panel by selecting a menu item and pressing
default		[Select *]. An asterisk (*) next to the item name indicates that it is now
		the default. The mopier retains this new value even when power is
		switched OFF.
Factory default		The value set for each menu item at the factory. Factory defaults
		(permanent default settings) are listed in Table 4-4.

Restoring Factory Settings

1With power off, press and hold [On]Line].

2Continue to hold [On]Line] and turn the mopier on (push power ON).

3Hold [On]Line] until this message appears:

COLD RESET

	This message is followed by the power-on self test message. Then the
	following message appears:
	RESTORING FACTORY
	SETTINGS
	until the mopier system completes power-on initialization.
	Factory defaults are listed in Table 4-4.
	By printing a PCL configuration page, you can see the current settings
N o t e
	and all the choices available. Refer to Figures 4-4 and 4-5 later in this
	chapter.

4 Mopier Control Panel

EN

Mopier Control Panel 4-5