Table 7-2

Mopier Messages, continued

 

 

 

 

 

 

 

Message

 

Description

Recommended Action

 

 

 

 

 

 

TRAY n EMPTY

 

The indicated tray is empty.

The mopier will still function.

 

 

 

 

Load paper, if desired.

 

 

 

 

 

 

TRAY n OPEN

 

The indicated tray is open.

The mopier will still function.

 

 

 

 

Close the tray, if desired.

 

 

 

 

 

RESTORING FACTORY

The mopier returns almost all

Reconfigure your mopier and

 

SETTINGS

 

settings to their factory default

MIO.

 

 

 

configurations.

When you install an MIO

 

 

 

 

 

 

 

 

card(s), to reinitialize the

 

 

 

 

mopier control panel you may

 

 

 

 

need to perform a cold reset.

 

 

 

 

(Note: In a shared

 

 

 

 

environment, this task should

 

 

 

 

only be performed by the

 

 

 

 

system administrator.) To

 

 

 

 

perform a cold reset, hold

 

 

 

 

down [On]Line] while

 

 

 

 

switching the mopier ON until

 

 

 

 

RESTORING FACTORY SETTINGS

 

 

 

 

appears in the display.

 

 

 

 

 

CLOSE PRINTER COVERS

One of the mopier’s covers or

Make sure your toner

 

 

 

doors is not firmly closed, or your

cartridge is fully seated and

 

 

 

toner cartridge is not installed

the mopier top cover or doors

 

 

 

correctly.

(left, front, and right) are

 

 

 

 

firmly closed.

 

 

 

 

 

 

ACCESS DENIED

 

Your network administrator has

See your network

 

 

 

locked out access to the control

administrator.

 

 

 

panel menu system, except for the

 

 

 

 

Test Menu and Tray 1 size.

 

 

 

 

 

 

INSTALL TONER CARTRIDGE

The toner cartridge is not installed

Insert a toner cartridge or

 

 

 

correctly or is not installed.

make sure the cartridge is

 

 

 

 

fully seated and the covers

 

 

 

 

are fully closed.

 

 

 

 

 

 

LOAD TRAY X

 

The mopier received a request for

Load the indicated tray with

 

<media type> <paper

a media type, or paper/envelope

the correct media, or see

 

size>

 

size not available in the mopier.

Chapter 4 or 5 to change the

 

or

 

 

media size and type through

 

LOAD ENV FEEDER

 

 

the control panel.

 

<media type> <paper

 

 

 

size>

 

 

 

 

 

 

 

 

 

Continued on the next page.

7-36 Maintenance and Troubleshooting

EN

Page 147
Image 147
HP 5SI manual Media type paper