HP 5SI manual Selecting the Left Output Bin through the Software

	Selecting the Left Output Bin
	The Left Output Bin should be used for envelopes, transparencies, and
	labels. Using this bin helps reduce paper curl.
	Selecting the Left Output Bin through the Software
	You can select an output bin through your software application or
	mopier driver, or from the mopier control panel. You will probably
	prefer to designate the paper destination in your software or mopier
	driver. Otherwise, follow the instructions below for setting the Left
	Output Bin as the mopier’s default output bin.
	Where and how you make selections depends on your software
N o t e
	application or associated mopier driver. The selection process may be
	available only from within the mopier driver. See Chapter 3 or your
	application manual for more information.

Selecting the Left Output Bin from the Control Panel

1Press [Menus] repeatedly until CONFIGURATION MENU appears.

2Press [Items] repeatedly until PAPER DESTINATION=TOP OUTPUT BIN * appears.

3Press [+] repeatedly until OPTIONAL OUTPUT BIN 1 or bin name assigned to it by the Network Administrator appears.

4Press [Select]*] to save your choice. An asterisk (*) appears next to your selection.

5 Print Tasks

EN

Print Tasks 5-25