HP 5SI manual Mopier received a request for Load the correct media

Table 7-2	Mopier Messages, continued
Message		Description	Recommended Action
MANUAL FEED TRAY 1		The mopier received a request for	Load the correct media in the
<media type> <paper		a media of a certain type and size	tray. See Chapter 5 for
size>		to be manually fed in Tray 1.	information on loading Tray 1.
			If the correct media is already
			loaded, press [On[Line] so the
			mopier will use that media.
PAPER DESTINATION =		Paper will be output to all available	No action required.
ALL BINS		bins.
INPUT TRAY = ALL		Paper will be pulled from all	No action required.
TRAYS		available trays.
TONER LOW		The toner cartridge is running out	Shake the toner cartridge or
		of toner.	replace it. Press [Select[*] to
			override the stopped condition
			and continue printing.
HP MIO 1 INITIALIZING		The MIO card(s) are initializing.	No action required. Display
or		This is a status message; during	clears automatically (this may
HP MIO 2 INITIALIZING		initialization the MIO is not active,	take up to five minutes,
		but since the mopier supports I/O	depending on the card).
		switching, the mopier remains	However, if the message
		online.	remains after five minutes a
			problem does exist. Contact
			you network administrator or
			consult the network
			documentation that came with
			your MIO card.

Continued on the next page.

7 Maintenance & Troubleshooting

EN Maintenance and Troubleshooting 7-37