HP 5SI manual Mopier is attempting to No action required

Table 7-2	Mopier Messages, continued
Message		Description	Recommended Action
CLEARING PAPER FROM		The mopier is attempting to	No action required.
MOPIER		remove unusable paper (such as
		after a paper jam)
REMOVE PAPER FROM TOP		The destination output bin is full	Remove the paper from the
OUTPUT BIN		and no more pages can be sent to	indicated output bin.
or		that bin.
REMOVE PAPER FROM
OPTIONAL OUTBIN n
INPUT DEVICE FEED PATH		The 2000-sheet input tray (Tray 4)	Push Tray 4 into the mopier
OPEN		is open.	until completely closed.
OUTPUT DEVICE DELIVERY		The output device is not properly	Ensure the output device is
PATH OPEN		seated against the mopier or the	pushed flush against the side
		stapler lid is open.	of the mopier and close the
			stapler lid.
STAPLE LIMIT REACHED		The stapler’s 20-sheet limit has	Send only print jobs of 20
		been reached. Job is not stapled.	pages or less to the stapler.
STAPLER SUPPLY OUT		The stapler is out of staples. Job is	Load a new stapler cartridge.
		not stapled.
CLEAR JAMMED STAPLE		The stapler has not finished	Clear the stapler jam and
		correctly.	resend job.
STAPLER ALIGN ERROR		The paper is misaligned and	Remove the paper from the
		cannot be stapled.	stapler and resend the job.

Continued on the next page.

7-38 Maintenance and Troubleshooting

EN