N o t e
All sample pages depict Letter size and portrait orientation. Similar problems may show up on different paper edges, depending on the paper feed.
Fading
If a white streak or faded area appears on the page (in the direction the paper passes through the mopier):
∙The toner cartridge supply is low. Remove the toner cartridge from the mopier and rotate it back and forth. If shaking the cartridge does not improve the print quality, replace the toner cartridge.
∙The print density adjustment is too light. Adjust print density.
Dropouts
If faded areas, generally rounded, occur randomly on the page:
∙The moisture content of the paper is uneven or the paper has moist spots on its surface. Try paper from a different source.
∙The paper lot is bad. The manufacturing processes can cause some areas to reject toner.
Try paper from a different source. If using paper within the specification required by the mopier does not correct your problem, your mopier may need service (refer to Table
Lines
If sharp black streaks appear on the page (in the direction the paper passes through the mopier), the
If smeared black streaks appear (in the direction the paper passes through the mopier), the fuser may be bad. Contact your HP service representative.
EN
