HP 5SI manual Adjusting Print Density from the Control Panel

	Print Density
	Print density is a measure of the darkness of the print on the page. The
	degree of darkness depends on how much toner is applied to the paper
	while printing.
	Print density adjustments are made through the control panel. Settings
	range from Print Density = 1 to Print Density = 5, with 5 being the
	darkest setting. See the procedure below to change the print density
	setting from the control panel. Changes to this setting are effective
	during a printed job within one or two pages.
	The higher the print density setting, the more toner the mopier uses. To
N o t e
	extend the life of your toner cartridge, choose lighter print density
	settings.
	If available, you can change this setting through your software
	application; otherwise, use the control panel.

Adjusting Print Density from the Control Panel

1Press [Menus] repeatedly until PRINT QUALITY MENU appears.

2Press [Items] repeatedly until PRINT DENSITY=3* appears.

3Press [+] repeatedly until the desired setting appears. Your choices are 1-5; 1 = the lightest; 5 = darkest.

4Press [Select]*] to save the setting.

6 Print Quality

EN Print Quality 6-3