HP 5SI manual Do not operate with this

Table 7-2	Mopier Messages, continued
If the following errors persist, call your HP-authorized service provider.
Message		Description		Recommended Action
55.xx ERROR		Mopier command error;		Press [Select]*] to resume
PRESS SELECT KEY		commands cannot be exchanged		operation. If necessary turn
		between the print engine and its		the mopier OFF and then ON.
		formatter board.
56.x ERROR		An invalid input		Press [Select[*] to resume
PRESS SELECT KEY		source/destination output		operation.
		bin has been requested.
		56.1	Invalid input source	Correct invalid request(s).
		56.2	Invalid output destination
		(for example, improper media size		If necessary turn the mopier
		being sent to duplexer)		OFF and then ON.
57.x FAN FAILURE		One of the cooling fans has failed.		Turn mopier off and call
CALL SERVICE				service immediately.
				Do not operate with this
				condition.
58.x PRINTER ERROR		One of the input paper tray lifters		Press [Select]*] to resume
CYCLE POWER		has failed.		operation. Note: the tray
				indicated by this error will be
				ignored until the next time the
				printer is turned off then on
				again.
59.x PRINTER ERROR		There is a problem with the main		Turn the mopier OFF then ON
CYCLE POWER		motor.		again.

7 Maintenance & Troubleshooting

Continued on the next page.

EN Maintenance and Troubleshooting 7-43