Stapler, Loading Staple Cartridges | HP 5SI specification

Stapler

The only maintenance required for the Stapler is to load new staple cartridges, and to clear staple jams if they occur.

Both procedures are explained below.

1Turn off the mopier and remove the Left Output Bin.

2Open the stapler unit cover.

3Squeeze the stapler cartridge tabs together and the pull empty staple cartridge out.

4Remove the orange plastic shipping clip from the new staple cartridge.

5Insert the new staple cartridge until it snaps into place.

6Close the stapler unit cover and replace the Left Output Bin.

7-6 Maintenance and Troubleshooting