HP 5SI manual Adjusting the Paper Stop, 3Adjustable Paper Stop

Adjusting the Paper Stop

The paper stop (shown in Figure 5-3) is located near the Top Output Bin. It can be adjusted to help paper lay flat as it exits the mopier. The paper stop does not have to be raised for Letter or A4 size media. Note that the mopier jams if the paper stop is set to a smaller size of media than is being printed.

1Pull the left side of the paper stop up until the stop is in an upright position.

2Slide the paper stop to the mark indicating the largest paper size to be printed.

Figure 5-3Adjustable Paper Stop

5-26 Print Tasks

EN