Whirlpool 2195258 manual Adjusting the crisper humidity control, Adjusting the crisper cover track

Models: 2195258

1 78
Download 78 pages 34.89 Kb
Page 18
Image 18
Adjusting the crisper humidity control

Adjusting the crisper humidity control

You can control the amount of humidity in the moisture-sealed crispers. Adjust the control to any setting between LOW and HIGH.

LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.

HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.

Adjusting the crisper cover track

Because your crispers are not the same size, your crisper cover has an adjustable center track so you can switch positions of the crispers. You can adjust the center track with the cover in the refrigerator by removing the crispers and the cover insert.

To remove the center track:

2

1. Push up the cover insert from the bottom, then slide out with both hands.

2.Gently pull up on front end of track.

3.Pull rear end of track out of opening in cover.

To replace the center track:

1. Insert rear end of track (with hole) into opening in cover.

1

2.Lower front end of track into slot.

3.Make sure rear end of track has snapped into place on under side of cover.

3

2

16

Page 18
Image 18
Whirlpool 2195258 Adjusting the crisper humidity control, Adjusting the crisper cover track, To remove the center track