Whirlpool 2195258 manual Changing the control settings, Removing the drop-in door trim pieces

Changing the control settings

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.

•Adjust the Refrigerator Control first.

•Wait at least 24 hours between adjustments.

•Then adjust the Freezer Control if needed.

		RECOMMENDED
CONDITION:	REASON:	CONTROL SETTINGS:
		Refrigerator	Freezer
Refrigerator	• Door opened often	4	2
section	• Large amount of food added
too warm	• Room temperature too warm
Freezer	• Door opened often
section	• Large amount of food added	3	4
too warm	• Very cold room temperature
	(can’t cycle often enough)
Refrigerator	• Controls not set correctly	2	4
section	for your conditions
too cold
Ice not	• Heavy ice usage	4	4
made fast	• Very cold room temperature
enough	(can’t cycle often enough)
Both	• Door opened often
sections	• Large amount of food added	4	4
too warm	• Very warm or very cold room

temperatures

Removing the drop-in door trim pieces

(on some models)

To remove the trim piece:

1.Remove all items from the shelf.

2. Pull straight up on the trim piece at each end.

To replace the trim piece:

1.Locate each end of the trim piece above the trim pocket opening.

2.Push the trim piece straight down until it stops.

3.Replace items on the shelf.

10