3.Press to DELETE TRAILto NAVIGATEENT.

4.Press to NAVIGATEENT. The unit begins showing navigation infor-

mation along the trail.

NOTE:

If you are already located at or near the beginning of your trail, the arrival alarm will go off as soon as you hit Enter. Press EXIT to clear the alarm and proceed.

5.Now, begin navigating with your unit.

6.When you reach your destination, be sure to cancel your navigation: press MENUMENUto CANCEL NAVIGATIONENT. The unit asks if you're

sure; press ENT.Figure 1.

Figure 2.

Figure 3.

Figure 4.

Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2, Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with Navigate command highlighted for Trail 6. A trail is always converted to a "route" when you navigate the trail.

On the Map Page, the trail you are navigating is represented by a dot- ted line that alternates with a flashing solid line. The Navigation Page will also show the navigated trail as a dotted line. The bearing arrow on the compass rose points to the next waypoint on the trail.

As you travel, the arrival alarm will go off when you near a trail way- point, and the bearing arrow on the compass rose will swing around and point to the next trail waypoint. Press EXIT to clear the alarm.

134

www.Busse-Yachtshop.de email: info@busse-yachtshop.de

Page 144
Image 144
Lowrance electronic LMS-520C, LMS-525C DF manual Sure press ←ENT.Figure, 134