Sonar Simulator

This unit has a built-in simulator that lets you run it as if you were on the water. All sonar features and functions are useable. When in simu- lator mode, you will see the chart file name in the Sonar Page title bar and a play symbol will flash on and off at the right end of the title bar.

To use the simulator:

1.From the Sonar Page, press MENUMENUto SYSTEM SETUPENT

to SIMULATORSENT.

System Setup menu with Simulators selected (left). Sonar Simulator page with Sonar Simulator On highlighted (right). The checkbox next Sonar Simulator On is checked (turned on).

NOTE:

With Simulate Position checked, the simulator will automatically run the GPS simulator (if GPS data was recorded with the sonar log).

2.Press to highlight SONAR SIMULATOR tab. To turn on the simulator, highlight SONAR SIMULATOR ON and press ENT, which will place an X in the checkbox. Repeat these steps to turn off the simulator.

3.Press EXIT repeatedly to return to the main display.

95

www.Busse-Yachtshop.de email: info@busse-yachtshop.de

Page 105
Image 105
Lowrance electronic LMS-525C DF, LMS-520C manual Sonar Simulator, To use the simulator