Manuals / Linksys / Computer Equipment / Network Router

Linksys RT31P2-NA manual Network Setup, Optional Settings, Router IP

Models: RT31P2-NA

1 81
Download 81 pages 23.4 Kb
Page 22
Image 22

Broadband Router with 2 Phone Ports

Optional Settings

Some of these settings may be required by your ISP. Verify with your ISP before making any changes.

Host Name and Domain Name. These fields allow you to supply a host and domain name for the Router. Some ISPs require these names as identification. You may have to check with your ISP to see if your broadband Internet service has been configured with a host and domain name. In most cases, leaving these fields blank will work.

MTU. The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network transmission. Select Enable and enter the value desired. It is recommended that you leave this value in the 1200 to 1500 range. For most DSL users, it is recommended to use the value 1492. By default, MTU is set at 1500 when disabled.

Network Setup

The Network Setup section allows you to change the Router’s local network settings.

Router IP

The values for the Router’s Local IP Address and Subnet Mask are shown here. In most cases, keeping the default values will work.

Local IP Address. The default value is 192.168.15.1.

Subnet Mask. The default value is 255.255.255.0.

Network Address Server Settings (DHCP)

These settings allow you to configure the Router’s Dynamic Host Configuration Protocol (DHCP) server function. The Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to each computer on your network. Unless you already have one, it is highly recommended that you leave the Router enabled as a DHCP server.

Local DHCP Server. DHCP is enabled by factory default. If you already have a DHCP server on your network, set the Router’s DHCP option to Disable. If you disable DHCP, remember to assign a static IP address to the Router.

Start IP Address. Enter a value for the DHCP server to start with when issuing IP addresses. Because the default IP address for the Router is 192.168.15.1, the Start IP Address must be 192.168.15. 2 or greater, but smaller than 192.168.15.254. The default Start IP Address is 192.168.15.100.

Chapter 5: Configuring the Router

packet: a unit of data sent over a network

16

The Setup Tab - Basic Setup

Page 21 Page 23
Page 22
Image 22
Linksys RT31P2-NA manual Network Setup, Optional Settings, Router IP, Network Address Server Settings Dhcp
Page 21 Page 23

RT31P2-NA specifications

The Linksys RT31P2-NA is a versatile voice-over-IP (VoIP) router designed to seamlessly combine internet connectivity with telephone services. Targeted at home users and small businesses, the device acts as a gateway through which users can connect multiple computers and internet-enabled devices while also facilitating digital phone services.

One of the standout features of the RT31P2-NA is its ability to support multiple voice lines, allowing users to make and receive calls while simultaneously using the internet. This dual functionality is made possible by its built-in VoIP capabilities, which leverage Session Initiation Protocol (SIP) technology, ensuring high-quality voice calls without interruptions from internet traffic.

In terms of connectivity, the router includes a standard Ethernet WAN port and four Ethernet LAN ports, providing ample options for wired connections to various devices. This setup is ideal for households or small offices that require stable, high-speed internet access across numerous devices. Additionally, the router features two telephone ports, allowing users to connect traditional analog phones directly for VoIP services.

Security is a key characteristic of the RT31P2-NA. It incorporates advanced security protocols such as WPA2 encryption and firewall capabilities to protect users' networks from unauthorized access and cyber threats. The router also supports Quality of Service (QoS) features, enabling users to prioritize bandwidth allocation for voice calls and other critical applications, ensuring minimal lag and superior call quality.

The design of the RT31P2-NA is user-friendly, with an intuitive interface that simplifies the setup process. The integrated configuration wizard helps users connect to their internet service and set up telephony services with ease. Furthermore, firmware updates can be easily managed, keeping the device secure and running optimally.

Moreover, Linksys is known for its reliable customer support and warranty services, which enhance the overall experience for users. The RT31P2-NA is a robust option for individuals and small businesses looking to streamline their communication needs while enjoying reliable internet connectivity. Whether for personal use or office applications, this router delivers a balanced mix of performance, functionality, and ease of use.