WebView Switches

Auto Negotiation. You can enable or disable the port’s Auto Negotiation feature. If using an SFP module, Auto Negotiation for the specific port should be set to Disable.

Current Auto Negotiation. This is the current setting of the port’s Auto Negotiation feature.

Admin Advertisement. Specifies the capabilities to be advertised by the port. Multiple options may be selected or Max Capability can be selected to cover all of the options. The available options are:

Max Capability. Indicates that the port speeds and duplex mode settings can be accepted.

10 Half. Indicates that the port is advertising a 10Mbps half duplex mode setting.

10 Full. Indicates that the port is advertising a 10Mbps full duplex mode setting.

100 Half. Indicates that the port is advertising a 100Mbps half duplex mode setting.

100 Full. Indicates that the port is advertising a 100Mbps full duplex mode setting.

1000. Indicates that the port is advertising a 1000Mbps full duplex mode setting.

Current Advertisement. The port advertises its capabilities to its neighbor port to begin the negotiation process. This field displays the current advertisement settings.

Neighbor Advertisement. The neighbor port (the port to which the selected interface is connected) advertises its capabilities to the port to start the negotiation process. This field displays the neighbor’s current settings.

Back Pressure. The Back Pressure feature of the selected port can be enabled or disabled.

Current Back Pressure. Displays whether Back Pressure is enabled or disabled on the currently selected port.

Flow Control. The Flow Control feature of the selected port can be enabled or disabled.

Current Flow Control. Displays whether Flow Control is enabled or disabled on the currently selected port.

MDI/MDIX. Select the Auto setting if you want the port to automatically detect the cable type. Select MDI if the port is connected to an end station. Select MDIX if the port is connected to a hub or another switch.

Current MDI/MDIX. This is the current MDI/MDIX status of the port.

PVE. When a port is a Private VLAN Edge (PVE) port, it bypasses the Forwarding Database and forwards all unicast, multicast, and broadcast traffic to an uplink.

Click the Save Settings button to save your changes.

Chapter 5: Using the Web-based Utility for Configuration

NOTE: All ports in the same PVE group should join the same VLAN group.

33

Port Management Tab - Port Settings

Page 43
Image 43
Linksys SRW2008P, SRW2008MP manual WebView Switches

SRW2008MP, SRW2008, SRW2008P specifications

The Linksys SRW2008P, SRW2008, and SRW2008MP are robust Layer 2 managed switches designed to meet the demands of small to medium-sized businesses looking for reliable networking solutions. These switches offer a range of features tailored to enhance network performance and security, making them ideal for both simple and complex networking environments.

The SRW2008P is notable for its Power over Ethernet (PoE) capabilities, enabling it to deliver power and data to PoE-compatible devices such as IP cameras and VoIP phones over a single Ethernet cable. This feature simplifies cabling requirements by reducing the need for separate power outlets, thereby streamlining installation and reducing clutter. With eight 10/100 Mbps Ethernet ports, the SRW2008P can cater to multiple devices, providing flexible connectivity options.

In contrast, the SRW2008 model focuses on delivering advanced layer 2 switching features without PoE functionality. It also boasts eight 10/100 Mbps ports and offers a comprehensive set of management features that include VLAN support, port mirroring, and Quality of Service (QoS) prioritization. These capabilities are essential for creating efficient and well-organized networks, allowing administrators to segment traffic and prioritize important data streams, which is crucial for maintaining optimal network performance.

The SRW2008MP model combines the features of the SRW2008 and SRW2008P with enhanced managed capabilities. It includes more advanced management features, allowing for greater control over traffic and network performance. The SRW2008MP supports both Layer 2 and Layer 3 capabilities, making it suitable for businesses looking to implement more sophisticated routing and switching protocols. With support for static routing, businesses can optimize their network traffic and improve overall efficiency.

All three models employ advanced technologies such as Spanning Tree Protocol (STP) and Link Aggregation Control Protocol (LACP), which enhance network resilience and bandwidth utilization. Furthermore, they come equipped with user-friendly web-based interfaces for easy configuration and monitoring, ensuring that network administration is straightforward.

In summary, the Linksys SRW2008P, SRW2008, and SRW2008MP switches deliver a combination of performance, reliability, and advanced management features ideal for small to medium-sized enterprises. Their PoE capabilities, robust VLAN support, and user-friendly interfaces make them versatile solutions for businesses seeking to enhance their network infrastructure.