36
Chapter 5: Using the Web-based Utility for Configuration
Port Management Tab - PoE Power Settings
WebView Switches
Port Management Tab - PoE Power Settings
Port. Displays the selected port’s number.
Admin Status. Indicates whether PoE is enabled or disabled on the port.
Priority. Indicates the PoE priority setting of the port. The possible values are: Critical, High and Low. The default
is Low.
Power Allocation (milliwatts). Indicates the actual amount of power the device can supply.
Mode. Indicates whether the port is enabled to utilize PoE.
Power Consumption (milliwatts). Indicates the amount of the power used by the device.
VLAN Management Tab - Create VLAN
The Create VLAN screen provides information and global parameters for configuring and working with VLANs.

Single VLAN

VLAN ID (2-4094). Indicates the ID number of the VLAN being configured. Up to 256 VLANs can be created. This
field is used to add VLANs one at a time. To add the defined VLAN ID number, press the Add button.
VLAN Name. Displays the user-defined VLAN name.

VLAN Range

VLAN Range. Indicates a range of VLANs being configured. To add the defined range of VLAN ID numbers, press
the Add Range button.

VLAN Table

The VLAN Table displays a list of all configured VLANs. The VLAN ID, VLAN Name, and status of the VLAN are
displayed here. To remove a VLAN, click the Remove button.
NOTE: The Modify PoE Page displays the currently configured PoE ports. This option is only
seen on the SRW2008P and SRW2008MP.
Figure 5-11: VLAN Management - Create VLAN
NOTE: VLANs that are created dynamically using
GVRP are assigned a VLAN name “Undefined”.
Figure 5-10: Port Management - PoE