WebView Switches

Chapter 5: Using the Web-based Utility for Configuration

Overview

This chapter describes the features included in the Web-based Utility. All of the features shown in this chapter, unless specifically identified, are included in the all of Fast Ethernet switches. Additional features for specific switches are noted.

Accessing the Web-based Utility

NOTE: The Web-based Utility is optimized for viewing with a screen resolution of 1024 x 768.

Internet Explorer version 5.5 or above is recommended.

Open your web browser and enter 192.168.1.254 into the Address field. Press the Enter key and the login screen will appear.

NOTE: The default IP address of the device is 192.168.1.254. If you have modified this address, enter the correct IP address. The device should be on the same subnet as the management station used to configure the device.

The first time you open the Web-based Utility, enter admin in the User Name field, and leave the Password field blank. Click the OK button. You can set a password later from the System Password screen.

Figure 5-1: Login Screen

The first screen that appears is the Setup Summary screen. Twelve main tabs are accessible from the Web-based

Utility: Setup, Port Management, VLAN Management, Statistics, ACL, Security, QoS (Quality of Service), Spanning

Tree, Multicast, SNMP, Admin, and Logout. Click one of the main tabs to view additional tabs.

NOTE: The LEDs displayed in the Web-based Utility are not the same as the LEDs on the front panel of the Switch. The front panel LEDs display different status information, which is described in Chapter 2: Getting to Know the Switch.

The LEDs on the Setup Summary screen display status information about their corresponding ports. A green LED indicates a connection, while a grey LED indicates no connection. An orange LED indicates the port has been closed down by the administrator. When you click a port’s LED, the statistics for that port are displayed.

NOTE: After configuring values using the Web-based Utility, you may be required to refresh the page to see the updated configuration.

Chapter 5: Using the Web-based Utility for Configuration

27

Overview

Page 37
Image 37
Linksys SRW2008P, SRW2008MP manual Using the Web-based Utility for Configuration, Accessing the Web-based Utility

SRW2008MP, SRW2008, SRW2008P specifications

The Linksys SRW2008P, SRW2008, and SRW2008MP are robust Layer 2 managed switches designed to meet the demands of small to medium-sized businesses looking for reliable networking solutions. These switches offer a range of features tailored to enhance network performance and security, making them ideal for both simple and complex networking environments.

The SRW2008P is notable for its Power over Ethernet (PoE) capabilities, enabling it to deliver power and data to PoE-compatible devices such as IP cameras and VoIP phones over a single Ethernet cable. This feature simplifies cabling requirements by reducing the need for separate power outlets, thereby streamlining installation and reducing clutter. With eight 10/100 Mbps Ethernet ports, the SRW2008P can cater to multiple devices, providing flexible connectivity options.

In contrast, the SRW2008 model focuses on delivering advanced layer 2 switching features without PoE functionality. It also boasts eight 10/100 Mbps ports and offers a comprehensive set of management features that include VLAN support, port mirroring, and Quality of Service (QoS) prioritization. These capabilities are essential for creating efficient and well-organized networks, allowing administrators to segment traffic and prioritize important data streams, which is crucial for maintaining optimal network performance.

The SRW2008MP model combines the features of the SRW2008 and SRW2008P with enhanced managed capabilities. It includes more advanced management features, allowing for greater control over traffic and network performance. The SRW2008MP supports both Layer 2 and Layer 3 capabilities, making it suitable for businesses looking to implement more sophisticated routing and switching protocols. With support for static routing, businesses can optimize their network traffic and improve overall efficiency.

All three models employ advanced technologies such as Spanning Tree Protocol (STP) and Link Aggregation Control Protocol (LACP), which enhance network resilience and bandwidth utilization. Furthermore, they come equipped with user-friendly web-based interfaces for easy configuration and monitoring, ensuring that network administration is straightforward.

In summary, the Linksys SRW2008P, SRW2008, and SRW2008MP switches deliver a combination of performance, reliability, and advanced management features ideal for small to medium-sized enterprises. Their PoE capabilities, robust VLAN support, and user-friendly interfaces make them versatile solutions for businesses seeking to enhance their network infrastructure.