24-Port 10/100/1000 Gigabit Switch with Webview and PoE
Multicast Tab - Static Member Ports
Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages. For certain applications that require tighter control, you may need to statically configure a multicast service on the Switch. First add all the ports attached to participating hosts to a common VLAN, and then assign the multicast service to that VLAN group.
Specify the interface attached to a multicast service (via an
Figure 5-47: Multicast - Static Member Ports
Multicast Tab - Static Router Ports
Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier. Therefore, if the IGMP querier is a known multicast router/ switch connected over the network to an interface (port or lag) on the Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups supported by the attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the Switch.
Specify the interfaces attached to a multicast router, indicate the VLAN which will forward all the corresponding multicast traffic, and then click Add.
Figure 5-48: Multicast - Static Router Ports
Chapter 5: Using the | 67 |
Multicast Tab - Static Member Ports
