24-Port 10/100/1000 Gigabit Switch with Webview and PoE

Long: Specifies 32-bit based values that range from 1-200,000,000. (This is the default.

Short: Specifies 16-bit based values that range from 1-65535.

Transmission Limit. The maximum transmission rate for BPDUs is specified by setting the minimum interval between the transmission of consecutive protocol messages. (Range: 1-10; Default: 3) Modify the required attributes for STP.

Click Save Settings to save the changes.

Spanning Tree Tab - STP Port Settings

The Port Information and LAG Information screens display the current status of ports and LAGs in the Spanning Tree.

State. Shows if Spanning Tree has been enabled on this interface.

Status. Displays current state of this port within the Spanning Tree:

Discarding - Port receives STA configuration messages, but does not forward packets.

Learning - Port has transmitted configuration messages for an interval set by the Forward Delay parameter without receiving contradictory information. Port address table is cleared, and the port begins learning addresses.

Forwarding - Port forwards packets, and continues learning addresses.

Forward Transitions. The number of times this port has transitioned from the Learning state to the Forwarding state.

Operational Edge Port. This parameter is initialized to the setting for Administrative Edge Port in STP Port Setting detail, but will be set to false if a BPDU is received indicating that another bridge is attached to this port.

Operational Link Type. The operational point-to-point status of the LAN segment attached to this interface. This parameter is determined by manual configuration or by auto-detection, as described for Administrative Link Type in the STP Port Setting detail.

LAG. Indicates if ports are members of a LAG. To configure STP port settings for LAGs, go to the table entry for the LAG number, which is listed after port g24 at the end of the table.

Click Detail to configure STP Port Settings for an interface.

Chapter 5: Using the Web-based Utility for Configuration

Figure 5-45: Spanning Tree - STP Port Settings

63

Spanning Tree Tab - STP Port Settings

Page 72
Image 72
Linksys SRW2024P manual Spanning Tree Tab STP Port Settings, Spanning Tree STP Port Settings

SRW2024P specifications

The Linksys SRW2024P is a robust and versatile managed switch designed to meet the networking needs of small to medium-sized businesses. This switch features 24 Ethernet ports, making it suitable for connecting multiple devices while delivering exceptional performance and reliability. One of the standout features of the SRW2024P is its Power over Ethernet (PoE) capability, allowing users to power devices like IP cameras, VoIP phones, and wireless access points directly from the switch, eliminating the need for additional power sources and simplifying installations.

The SRW2024P supports a range of advanced technologies, including VLANs (Virtual Local Area Networks), which enable network segmentation and improved security by isolating different network segments. This segmentation can help enhance performance and control broadcast domains effectively. Additionally, the switch supports Quality of Service (QoS), allowing users to prioritize network traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance. This feature is particularly beneficial in environments with high-definition video streaming or VoIP communications.

Another critical aspect of the Linksys SRW2024P is its support for robust network security protocols. With features like 802.1X port-based authentication, network administrators can enforce strict access control policies, ensuring that only authorized devices can connect to the network. The switch also provides basic security features such as MAC address filtering and access control lists (ACLs), enhancing the overall security of the network.

The easy-to-use web-based management interface makes it simple for administrators to configure and monitor the switch. It provides real-time information about network performance, port status, and traffic statistics, allowing for effective troubleshooting and management. The SRW2024P also includes the capability for SNMP (Simple Network Management Protocol), enabling integration with third-party network management solutions for more advanced monitoring and control.

In terms of physical characteristics, the Linksys SRW2024P is designed for reliable performance in various environments, with a compact rack-mountable chassis. This design allows for easy installation in standard 19-inch racks, making it a practical choice for businesses looking to optimize their network infrastructure.

In summary, the Linksys SRW2024P managed switch combines advanced networking features, ease of management, and PoE capabilities, making it an ideal choice for growing businesses looking to enhance their connectivity and network performance. With its reliable security measures, VLAN support, and QoS capabilities, the SRW2024P provides a solid foundation for a robust and scalable network.