24-Port 10/100/1000 Gigabit Switch with Webview and PoE

• Both. Defines the port mirroring on both receiving and transmitting ports.

Target Port. Defines the port from which traffic is mirrored.

Specify the source port, the traffic type to be mirrored, and the target port, then click Add. The mirror session is displayed in the text box.

Admin Tab - Cable Test

To test the connection quality of an attached cable, click on the Test button for the port. Note that the cable needs to be connected at both ends, otherwise the test will fail.

Port. This is the port to which the cable is connected.

Test Result. This is the test result. OK indicates that the cable passed the test. No Cable means there is no cable connected to the port. Open Cable means the cable is connected on only one side. Short Cable indicates that a short has occurred in the cable. Undefined indicates that the test could not be properly performed.

Cable Fault Distance. This is the distance from the port at which the cable error occurred.

Last Update. This is the last time the port was tested.

Test. Click the Test button to perform the test.

Admin Tab - Ping

You can use a ping to see if another site on the network can be reached. Ping sends ICMP echo request packets to another node on the network. Enter the IP address or host name of the device you want to ping, then click Go. The ping results are displayed in the Ping Status text box.

The following are some common displayed results of a ping:

Normal response - The normal response occurs in one to ten seconds, depending on network traffic.

Destination does not respond - If the host does not respond, a “timeout” appears in ten seconds.

Destination unreachable - The gateway for this destination indicates that the destination is unreachable.

Network or host unreachable - The gateway found no corresponding entry in the route table

Chapter 5: Using the Web-based Utility for Configuration

Figure 5-58: Admin - Cable Test

Figure 5-59: Admin - Ping

75

Admin Tab - Cable Test

Page 84
Image 84
Linksys SRW2024P manual Admin Tab Cable Test, Admin Tab Ping

SRW2024P specifications

The Linksys SRW2024P is a robust and versatile managed switch designed to meet the networking needs of small to medium-sized businesses. This switch features 24 Ethernet ports, making it suitable for connecting multiple devices while delivering exceptional performance and reliability. One of the standout features of the SRW2024P is its Power over Ethernet (PoE) capability, allowing users to power devices like IP cameras, VoIP phones, and wireless access points directly from the switch, eliminating the need for additional power sources and simplifying installations.

The SRW2024P supports a range of advanced technologies, including VLANs (Virtual Local Area Networks), which enable network segmentation and improved security by isolating different network segments. This segmentation can help enhance performance and control broadcast domains effectively. Additionally, the switch supports Quality of Service (QoS), allowing users to prioritize network traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance. This feature is particularly beneficial in environments with high-definition video streaming or VoIP communications.

Another critical aspect of the Linksys SRW2024P is its support for robust network security protocols. With features like 802.1X port-based authentication, network administrators can enforce strict access control policies, ensuring that only authorized devices can connect to the network. The switch also provides basic security features such as MAC address filtering and access control lists (ACLs), enhancing the overall security of the network.

The easy-to-use web-based management interface makes it simple for administrators to configure and monitor the switch. It provides real-time information about network performance, port status, and traffic statistics, allowing for effective troubleshooting and management. The SRW2024P also includes the capability for SNMP (Simple Network Management Protocol), enabling integration with third-party network management solutions for more advanced monitoring and control.

In terms of physical characteristics, the Linksys SRW2024P is designed for reliable performance in various environments, with a compact rack-mountable chassis. This design allows for easy installation in standard 19-inch racks, making it a practical choice for businesses looking to optimize their network infrastructure.

In summary, the Linksys SRW2024P managed switch combines advanced networking features, ease of management, and PoE capabilities, making it an ideal choice for growing businesses looking to enhance their connectivity and network performance. With its reliable security measures, VLAN support, and QoS capabilities, the SRW2024P provides a solid foundation for a robust and scalable network.